Linux OS/Redhat (CentOS & Rocky Linux)

Cent OS 기본적인 설치 및 설정

서버엔지니어 2023. 3. 5.

728x90

1. 설치 파일(.iso) 실행

- 언어 선택
: 한국어
- SW 선택
: 기본웹서버 선택 -> 호환성 라이브러리, 개발용 도구 선택
: 원하는 경우 웹서버
- 파티션 선택
: 보통 /boot 512MiB, /swap 4GiB(4096MiB) - 12GB이하일때, / 나머지 전부로 설정
: swap 제외 ext4로 설정
: 추가 하드 디스크가 있는 경우 설치 완료 후 작업
: 변경사항 적용으로 마무리
- 설치시작 후 리부팅
: ROOT 암호 설정
: 설치 완료 후 리부팅

3. 커널 업데이트

각 OS버전마다 추가 저장소 저장
=======================================================================
CentOS6
- epel-release
yum update -y curl nss nss-util nspr
yum install -y wget vim
rpm -Uvh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

- remi-release
yum install -y https://rpms.remirepo.net/enterprise/remi-release-6.rpm
cd /usr/local/src
wget https://rpms.remirepo.net/enterprise/remi-release-6.rpm
rpm -ivh remi-release-6.rpm
yum update -y
=======================================================================

=======================================================================
CentOS7

- epel-release
yum update -y curl nss nss-util nspr
yum install -y wget vim epel-release

- remi-release
yum install -y https://rpms.remirepo.net/enterprise/remi-release-7.rpm
yum update -y
========================================================================

=======================================================================
CentOS8

- epel-release
yum update -y curl nss nss-util nspr
yum install -y wget vim
dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm -y

- remi-release
yum install https://rpms.remirepo.net/enterprise/remi-release-8.rpm
cd /usr/local/src
wget https://rpms.remirepo.net/enterprise/remi-release-8.rpm
rpm -ivh remi-release-8.rpm
dnf install -y rocky-release
yum update -y

- Rocky 8 repo 활성화
sed s/enabled=0/enabled=1/g -i /etc/yum.repos.d/Rocky-Extras.repo
sed s/enabled=0/enabled=1/g -i /etc/yum.repos.d/Rocky-HighAvailability.repo
sed s/enabled=0/enabled=1/g -i /etc/yum.repos.d/Rocky-NFV.repo
sed s/enabled=0/enabled=1/g -i /etc/yum.repos.d/Rocky-Plus.repo
sed s/enabled=0/enabled=1/g -i /etc/yum.repos.d/Rocky-PowerTools.repo
sed s/enabled=0/enabled=1/g -i /etc/yum.repos.d/Rocky-RT.repo
sed s/enabled=0/enabled=1/g -i /etc/yum.repos.d/Rocky-ResilientStorage.repo
yum update -y
========================================================================

Rocky Linux 9

yum update -y curl nss nss-util nspr
yum install -y wget vim
dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm

dnf install -y https://rpms.remirepo.net/enterprise/remi-release-9.rpm

dnf config-manager --set-enabled highavailability

dnf config-manager --set-enabled resilientstorage

dnf config-manager --set-enabled nfv

dnf config-manager --set-enabled rt

dnf config-manager --set-enabled sap

dnf config-manager --set-enabled saphana

dnf config-manager --set-enabled rt

dnf config-manager --set-enabled plus

========================================================================

오류 나면 yum clean all

yum groupinstall -y base
: 중간 중간 y 선택
yum install -y wget vim

vi /etc/bashrc
========================================================================
alias vi='vim'
========================================================================

입력후 저장하고 나오기
source /etc/bashrc

4. 루트 권한 계정 설정

useradd -G wheel 계정명
passwd 계정명
vi /etc/group
: wheel 그룹에 생성한 계정이 포함되어 있는지 확인
vi /etc/pam.d/su
=================================================================
auth required pam_wheel use_uid주석해제
=================================================================
chgrp wheel /bin/su
chmod 4750 /bin/su

5. SSH 설정

- 루트 계정 사용 불가
vi /etc/ssh/sshd_config
=====================================================================
PermitRootLogin yes 주석해제 후 no로 값 변경
=====================================================================
- ssh 테스트
: 루트 계정으로는 접근 불가
: wheel 그룹으로 생성한 계정은 접근 가능
: wheel 그룹 게정으로 로그인 후 su 변환 가능

systemctl restart sshd
service sshd restart

6. IPTABLES 설정

yum install -y iptables-services
systemctl status firewalld
: 기존 방화벽 상태확인
systemctl stop firewalld
systemctl disable firewalld
cp -arp /etc/sysconfig/iptables /etc/sysconfig/iptables_original
or 날짜

vi /etc/sysconfig/iptables
=========================================================================
#Firewall configuration written by system-config-securitylevel
#Manual customization of this file is not recommended.
*filter
:INPUT ACCEPT [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
-A INPUT -i lo -j ACCEPT
-A INPUT -p icmp --icmp-type any -j ACCEPT
-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 25 -j ACCEPT
-A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 110 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 143 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 50001:50005 -j ACCEPT
-A INPUT -j REJECT --reject-with icmp-host-prohibited
COMMIT
==================================================================

systemctl enable iptables
systemctl restart iptables
systemctl status iptables

7. selinux끄기

vi /etc/sysconfig/selinux
==================================================================
SELINUX=disabled
==================================================================
재부팅

8. FTP(vsftpd) 설정

yum install -y vsftpd
systemctl enable vsftpd
: 리부팅 시 자동 실행
systemctl start vsftpd
: 실행

vi /etc/vsftpd/vsftpd.conf
==================================================================
anonymous_enable=NO
chroot_local_user=YES
allow_writeable_chroot=YES (CentOS 6에서 제외)
#chroot_list_enable=YES (주석을 풀어서 YES로 사용한다면 /etc/vsftpd/chroot_list 에 상위폴더로 갈 수 있는 계정을 넣어준다.)
#chroot_list_file=/etc/vsftpd/chroot_list
listen=YES
listen_ipv6=NO
local_enable=YES
write_enable=YES
userlist_enable=YES
userlist_deny=YES
#userlist_file=/etc/vsftpd/user_list (기본값 = /etc/vsftpd/user_list)
#userlist_file=/etc/vsftpd/user_list
pasv_enable=YES
pasv_promiscuous=YES
pasv_min_port=50001
pasv_max_port=50005
==================================================================
touch /etc/vsftpd/chroot_list 만들고 아무것도 넣지않기 넣으면 상위폴더까지 갈 수 있는 권한을 가짐
service restart vsftpd
systemctl restart vsftpd
systemctl restart iptables
chkconfig vsftpd on
: 재실행

9. history 시간표시설정

vi /etc/profile
==================================================================
HISTSIZE=100000000
HISTTIMEFORMAT="[%Y-%m-%d %H:%M:%S] "
==================================================================

아래는 접속했던 IP 가 어떠한 계정으로 로그인해서 history 명령어입력
==================================================================
#history
USER_IP=`who -u am i 2>/dev/null| awk '{print $NF}'|sed -e 's/[()]//g'`
if [ -z $USER_IP ]
    then
    USER_IP=`hostname`
fi

HISTSIZE=100000000
export HISTTIMEFORMAT="[%Y.%m.%d %H:%M:%S]  [${USER_IP}]  [${LOGNAME}]  "
==================================================================

source /etc/profile

10. 매시간동기화

## CentOS 6 ~ 7

mkdir /root/bin
yum install -y rdate

ln -sf /usr/share/zoneinfo/Asia/Seoul /etc/localtime

vi /root/bin/time_sync.sh
==================================================================
#!/bin/bash
rdate -s time.bora.net && date && hwclock -r && hwclock -w > /dev/null 2>&1
exit 0;
==================================================================

chmod 755 /root/bin/time_sync.sh
chown root:root /root/bin/time_sync.sh

vi /etc/crontab
==================================================================
0 * * * * root sh /root/bin/time_sync.sh
==================================================================

systemctl restart crond
systemctl enable crond

## CentOS 8 & Rocky Linux 8 & Alma Linux 8

dnf install -y chrony

ln -sf /usr/share/zoneinfo/Asia/Seoul /etc/localtime

vi /etc/chrony.conf
==================================================================
server time.bora.net iburst
server zero.bora.net iburst
==================================================================
systemctl enable chronyd
systemctl restart chronyd

mkdir -p /root/bin

vi /root/bin/time_sync.sh
==================================================================
#!/bin/bash
chronyc sources -v && hwclock -r && hwclock -w && hwclock -v > /dev/null 2>&1
exit 0;
==================================================================

chmod 755 /root/bin/time_sync.sh
chown root:root /root/bin/time_sync.sh

vi /etc/crontab
==================================================================
0 * * * * root sh /root/bin/time_sync.sh
==================================================================

systemctl restart crond
systemctl enable crond

timedatectl
chronyc sources -v

11. APM설치

mysql은 root의 비밀번호는 정해져있다.

12. IKVM 계정생성

DOS USB 부팅 후
cd ipmicfg
ipmicfg.exe -user add 3 일반계정 password 2
ipmicfg.exe -user level 3 4
ipmicfg.exe -user setpwd 3 비밀번호입력
ipmicfg.exe -user list
ctrl+alt+del 리부팅 진행 후 부팅 시작하면 USB 제거

13. 히스토리삭제

cat /dev/null > /root/.bash_history
history -c

14. 추가디스크 포맷 및 자동마운트 설정

fdisk -l
연결한 디스크 디렉토리 파악
fdisk /dev/???
=========================================================================
m
n
p
1
그냥엔터
+500G
사이즈 정하고
w
저장하고 나가기
=========================================================================

포맷

ex) mkfs -t ext4 /dev/sdb1
=========================================================================
blkid로 확인
/dev/sdb1: UUID="????????????????????????????????????" TYPE="ext4"
/dev/sdb2: UUID="????????????????????????????????????" TYPE="ext4"
=========================================================================

blkid >> /etc/fstab

vi /etc/fstab
UUID=??????????????????????????????? /back2                  ext4    defaults        0 0

#/dev/sdb1: UUID="????????????????????????????????????" TYPE="ext4"
#/dev/sdb2: UUID="????????????????????????????????????" TYPE="ext4"
=========================================================================

mount -a

또는

GPT 파티션 생성
parted /dev/sdb
===================================================================================
GNU Parted 2.1
Using /dev/sdb
Welcome to GNU Parted! Type 'help' to view a list of commands.

(parted) help
  align-check TYPE N                        check partition N for TYPE(min|opt) alignment
  check NUMBER                             do a simple check on the file system
  cp [FROM-DEVICE] FROM-NUMBER TO-NUMBER   copy file system to another partition
  help [COMMAND]                           print general help, or help on COMMAND
  mklabel,mktable LABEL-TYPE               create a new disklabel (partition table)
  mkfs NUMBER FS-TYPE                      make a FS-TYPE file system on partition NUMBER
  mkpart PART-TYPE [FS-TYPE] START END     make a partition
  mkpartfs PART-TYPE FS-TYPE START END     make a partition with a file system
  move NUMBER START END                    move partition NUMBER
  name NUMBER NAME                         name partition NUMBER as NAME
  print [devices|free|list,all|NUMBER]     display the partition table, available devices, free space, all found
        partitions, or a particular partition
  quit                                     exit program
  rescue START END                         rescue a lost partition near START and END
  resize NUMBER START END                  resize partition NUMBER and its file system
  rm NUMBER                                delete partition NUMBER
  select DEVICE                            choose the device to edit
  set NUMBER FLAG STATE                    change the FLAG on partition NUMBER
  toggle [NUMBER [FLAG]]                   toggle the state of FLAG on partition NUMBER
  unit UNIT                                set the default unit to UNIT
  version                                  display the version number and copyright information of GNU Parted
============================================================================================
(parted) mklabel gpt
============================================================================================

파티션 확인
(parted) print
===========================================================================================

Model: LSI 9750-16i4e DISK (scsi)
Disk /dev/sda: 30.0TB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number  Start  End  Size  File system  Name  Flags
===========================================================================================

파티션 설정 단위

(parted) unit TB
파티션 설정 (0-15TB, 15TB-30TB)
===========================================================================================
(parted) mkpart data1 0 15
===========================================================================================
(parted) mkpart data2 15 30
===========================================================================================

※ "%" 설정도 가능함

(parted) mkpart data1 0 50%
(parted) mkpart data2 50% 100%
===========================================================================================

파티션 확인

(parted) print
Model: LSI 9750-16i4e DISK (scsi)
Disk /dev/sda: 30.0TB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name   Flags
1      1049kB  15.0TB  15.0TB  ext4         data1
2      15.0TB  30.0TB  15.0TB  ext4         data2

저작자표시 비영리 변경금지

'Linux OS > Redhat (CentOS & Rocky Linux)' 카테고리의 다른 글

CentOS 6 -> CentOS 7로 OS 업그레이드(repo 이용) (0)	2023.03.09
CentOS 6 EoS로 인한 yum repo 주소로 변경 (0)	2023.03.09
CentOS 8, Rocky Linux 8 네트워크 명령어 nmcli (0)	2023.03.09
firewalld 방화벽 설정, 옵션 정리 (CentOS 7 OS 이상) (0)	2022.11.16
CentOS 언어셋 설정 (0)	2022.11.16